Visit FASTCUT at JIMTOF 2026 to discuss the next step for your shaft and tube production. Meet our team at Booth E1009-4, Tokyo Big Sight, from October 26 to 31, 2026, at the 33rd Japan International Machine Tool Fair.
Turning a workpiece around and clamping it again adds handling to every part, and each new setup puts positioning at risk. FastCut® focuses on machines built for shaft and tube machining, together with automation solutions that connect the whole production process. The goal is higher machining accuracy and better production efficiency with fewer handling steps.
When both ends of a shaft need machining, a conventional process often splits the work into two setups. The part is machined on one side, removed, turned around, and clamped again. Every reclamping step adds handling time and creates another chance for the reference position to shift.
FASTCUT center drive technology machines both ends in a single chucking. The workpiece is held at the center, leaving both ends open for machining at the same time. Keeping the part in one clamping helps limit position deviation caused by reclamping, while combining operations that would otherwise be spread across separate machines.
Combining processes in this way supports shorter cycle times and a simpler process flow. See how this approach works on our center drive lathe page.
Shafts and tubes vary widely in length, diameter, and required features, so no single machine layout fits every part. Visitors to FASTCUT at JIMTOF 2026 can learn about three equipment options for different machining requirements.
01. XFC10 for Heavy-Duty End Facing
The XFC10 is designed for heavy cutting at the workpiece ends, for applications where facing is a demanding part of the process.
02. XF Modular Platform
The XF modular platform lets the machine configuration be selected according to the machining requirements, so the setup follows the part instead of the other way around.
03. XWT20 Twin-Turret Machine for Long Shafts
The XWT20 is a twin-turret machine intended for long shaft applications, where part length makes support and tool access key parts of the process plan.
The right configuration depends on your workpiece, tolerances, and production volume. Our team can review these details with you at the booth and suggest which platform fits your application.
A machine is only one step in the production flow. Loading, unloading, cleaning, and inspection also decide how smoothly parts move through the line and how often operators need to step in.
FASTCUT turnkey automation integrates machining, fixtures, automated loading and unloading, cleaning, and automatic measurement into one coordinated solution. The scope can range from a stand-alone machine to a complete production cell, depending on your needs.
One point of contact handles the project from machine selection to cell integration. Instead of coordinating several suppliers for the machine, the fixtures, and the automation, you work with one team responsible for how every step fits together. Learn more about our approach on the FASTCUT machining technology page.
Show details are available on the official JIMTOF 2026 outline page, and visitors can register through the JIMTOF admission registration page.
To make the most of your visit to FASTCUT at JIMTOF 2026, bring your part drawing, target cycle time, and planned production volume. With these details, our team can discuss a specific equipment configuration and a practical path toward automation for your line.
FASTCUT also presented its shaft machining and automation solutions at IMTS 2026 in Chicago. Read the FASTCUT at IMTS 2026 preview for more background.
Where can I find FASTCUT at JIMTOF 2026?
FASTCUT will be at Booth E1009-4, Tokyo Big Sight, from October 26 to 31, 2026. The show is open from 10:00 to 17:00, and until 16:00 on the final day.
What solutions can I discuss with FASTCUT at JIMTOF 2026?
Our team will introduce double-end machining with center drive technology, the XFC10, the XF modular platform, and the XWT20 twin-turret machine, along with turnkey automation for shaft and tube production.
What should I bring to a meeting with FASTCUT at JIMTOF 2026?
Bring a part drawing, your target cycle time, and your expected production volume. These details allow a more specific discussion of machine configuration and automation.
Can I schedule a booth meeting in advance?
Yes. Contact FASTCUT to schedule a booth tour and include your preferred date and the application you want to discuss. If you cannot attend the show, you can use the same page to send your requirements.