FC-SF10

SPINDLES EXCHANGES LATHE SOLUTION

IT ALL STARTS FROM CENTER

Center Spindle CNC Lathe

Automatic Polygon Machine

Two Combo Lathe

CENTER DRIVE LATHE

SINGLE HOLDING SPINDLE

A spindle with built-in hydraulic chuck isinstalled in the center of the machine bedand two independent tooling systems areinstalled on the right and left side of thespindle. The machine can turn two endsof parts simultaneously to achieve precise concentricity.

 

CENTER DRIVE LATHE

DUAL HOLDING SPINDLE

Our continuously developed center spindleunits have two built-in actuators thatcontrol two different chucks. This enablestwo parts to be clamped and aligned onthe same spindle. This very efficientproduction machine uses less floor spaceand also consumes less energy.

 

POLYGON TURRET

MULTI-TASKING TECHNOLOGY

The Polygon Milling Machine is the first ofthe “Fastcut” products and we havecontinued manufacturing this type ofmachine for more than 30 years. Theturning ration between the rotation speed ofthe spindle and the cutter head and thenumber of inserts mounted on head allowsthe turn-milling of multi-surface parts toachieve in the shortest time.

 

Output Shaft

30% cycle time reduction 50% space reduction.

We have an integrated deep-hole drilling system on the tailstock and a turret could perform parallel turning while the tailstock was drilling. This would dramatically reduce cycle time. And the center drive machine could turn the ID immediately after drilling was completed without any unclamping/clamping being needed. This would give an excellent CPK result.